Sign up
Knowledge base

Cost function for chlorine gas dosing

Cost Functions

The original cost function (A1) for the dosage of chlorine gas is as follows:

Función de costo para dosificación de cloro gaseoso (1)

This function has as variable (x), which is the chlorine dosing capacity in lb / d (Pounds per day). The following relationship was used to express this capacity as a function of flow (L / s):

Función de costo para dosificación de cloro gaseoso (2)

Where Q is the flow rate and D is the applied dose. For Chlorine, a usual dose of 1.2 mg / L was taken. Based on the above, the following replacement of the variables of the equation:

Función de costo para dosificación de cloro gaseoso (3)

Additional modifications to this function correspond to the correction of costs per year, with the CCI ENR index of 9547 of the year 2013, to obtain A3. Then part B2 related to the elasticity index is added. This is done in the same way as explained in the Cost Functions Wiki — General.

Consequently, the following function is obtained:

Función de costo para dosificación de cloro gaseoso (4)

Bibliography

  1. Preliminary Cost Estimation Models for Construction, Operation, and Maintenance of Water Treatment Plants Jwala R. Sharma, Ph.D., M.ASCE; Mohammad Najafi, Ph.D., P.E., F.ASCE; and Syed R. Qasim, Ph.D., P.E., M.ASCE 2013

    Reliable cost estimation of construction, operation, and maintenance (O&M) of water treatment plants is essential for project planning and design. The authors have developed construction and O&M cost models for different unit operations and processes involved in water treatment plants. This paper presents the use of a single cost index to further update construction and O&M costs.

References

Back to top